Products and Services for Embedded Computing

cPCI Single Board Computers
Pentium

We have a new website. Please go to the

new page for  the most up to date information:

CompactPCI Pentium Single Board Computers

Core Duo

Core 2 Duo

 Intel Pentium III

 Intel Pentium 4 - M

Dual Intel Xeon

 Intel Pentium M

Pentium

Core Duo

 6U Core Duo Pentium Single Board Computer

PP410

  • 2.0 GHz Intel® Core™ Duo processor T2500
  • 1.66 GHz Intel® Core™ Duo processor L2400
  • Common processor features are:
    • Dual-core CPU
    • 667 MHz Front Side Bus
    • 64 Kbytes of primary (L1) on-die cache
    • 2 Mbytes of secondary (L2) on-die cache
       

 6U cPCI Dual-Core Intel® Xeon® 1.66MHz ULV processor Single Board Computer

PP421

  • Supports 667 MHz processor bus to give peak bandwidth of 5.3 Gbytes/s
    • Internal primary (L1) on-die cache
    • 2 Mbytes secondary (L2) shared on-die cache
    • Intel® Core™ Microarchitecture
  • Supports up to 8 Gbytes DDR2-400 ECC SDRAM
  • 1 Mbyte of BIOS Flash EPROM
  • High resolution graphics interface
  • 1 x PMC site
  • 4 Gigabit Ethernet ports
  • 1 EIDE, 2 SATA Interfaces
  • 2 x asynchronous RS232 serial channels
  • 3 x USB 2.0 interfaces accessed via J5 to the  Transition Module
  • 1 x USB 2.0 interface via front panel
  • 0°C to +55°C (operating)
     

3U CompactPCI®/Express Core Duo SBC

F15

  • Intel® Core™ Duo T2500, 2GHz
  • PCI Express® 6 lanes x1
  • 4HP system master or busless
  • 32-bit CompactPCI® or cPCI Express®
  • Up to 1 GB DDR2 DRAM soldered
  • CompactFlash® or 1.8" hard disk slot
  • 2 SATA interfaces
  • Video via VGA and 2 DVI
  • 2 Gigabit Ethernet (PCIe)
  • Up to 8 USB 2.0
  • High Definition audio
  • Prepared for rugged environments
     

 

 

 Intel Core 2 Duo

 2.16 MHz Intel Core 2 Duo 6U cPCI Single Board Computer with
 Dual PMC Sites

PP412

  • 2.16 GHz Intel Core 2 Duo Processor T7400
    • 667 MHz Front Side Bus
    • 64 Kbytes of primary (L1) on-die cache
    • 4 Mbytes of shared secondary (L2) on-die cache
    • Intel® 64 (or Intel® EM64T) 64-bit computing support
  • 2.0 GHz and 1.66 GHz Core Duo processor versions available;
           see PP410 datasheet
  • Utilizes Intel® E7520 server class chipset:
    • Uses Intel® 6300ESB I/O Controller Hub
  • 2.0 and 1.66 MHz versions available
  • Dual PMC sites
  • Up to 4 gbytes of dual channel DDR2-0400 ECC SDRAM
  • 3 Gigabit Ethernet ports
  • 4 x USB 2.0 interfaces
  • 2 x SATA-150 interfaces via J5
  • Operating temperature:
    • 0°C to +55°C (N-Series)
  • For extended temperature operation see PP410 datasheet
     

 Intel Pentium III

Concurrent Technologies Low Power Dual 933MHz Pentium III SBC

PP121/01x

  • Dual 933 MHz Intel® Pentium® III processor - Low Power
    • 32 Kbytes of primary (L1) on-die cache
    • 512 Kbytes of secondary (L2) on-die cache
    • no CPU fan
  • Single slot
  • Up to 1 GB of 133 MHz ECC SDRAM:-
  • High performance Ultra 160 SCSI interface
  • High performance EIDE interfaces with optional on-board disk drive or optional CompactFlash or IBM / Hitachi Microdrive
  • 4 x channels supporting 10 Base-T, 100 Base-TX, 1000 Base-T
  • Dual Gigabit Packet Switching Back Plane
  • 1 x PMC site (32/64) 33/66 MHz PCI operation
  • High resolution graphics interface
  • 16 MB Application Flash EPROM
  • 512 KB of BIOS Flash EPROM
  • Compact PCI controller:
    • Operates in a system slot or peripheral slot
    • 23/64 bit at 33/66 MHz Compact PCI interface
  • Option to bypass Compact PCI bus (Satellite mode)
  • IPMI )Intelligent Platform Management Interface):
    • PICMG 2.9 (System Management Specification)
  • Keyboard and mouse interfaces
  • 2 x USB ports
  • 2 x asynchronous RS232 serial channels
  • Watch dog timer, long duration timer
  • Optional transition module for rear panel I/O
  • Optional blank front panel
  • Extended temp version available
  • Support for Windows NT. Windows 2000, Windows XP, Linux and QNX
     

 Intel Pentium 4 - M

Concurrent Technologies Intel Pentium 4 Processor-M Single Board Computer PICMG 2.16 Compliant

PP200/01x

  • 2.2 GHz or 1.7 GHz Intel Pentium 4 Processor-M:
    • 400 MHz Front Side Bus
    • 512 Kbytes L2 cache
    • no CPU fan needed
    • single slot
  • Up to 2 Gbytes DDR SDRAM (with ECC)
  • Ultra 160 SCSI interface
  • High performance EIDE interfaces with on-board
  • CompactFlash site
  • Optional on-board 2.5 inch disk drive or
  • CompactFlash/Microdrive™ carrier (within a single slot)
  • 3 x 10/100/1000Mbps Ethernet interfaces
  • Dual Gigabit Packet Switching Backplane (PICMG 2.16)
  • 1 x PMC module interface (32/64-bit and 33/66 MHz)
  • High resolution graphics interface
  • PS/2 Keyboard and Mouse port
  • 512 Kbytes of BIOS Flash EPROM
  • 8 Mbytes of Application Flash
  • CompactPCI controller:
    • operates in system slot or peripheral slot
    • 32/64-bit at 33/66 MHz CompactPCI interface
  • Option to bypass CompactPCI bus (Satellite Mode)
  • IPMI (Intelligent Platform Management Interface):
    • PICMG 2.9 (System Management Specification)
    • with BMC (Baseboard Management Controller)
  • 2 x USB ports
  • 2 x asynchronous RS232 serial channels
  • Floppy disk interface
  • Watchdog timer; Long Duration Timer
  • Parallel Printer Port (ECP, EPP and IEEE1284)
  • Optional blank front panel (see PP 200/11x datasheet)
  • Optional Transition Module for rear panel I/O
  • Support for Linux®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded,  VxWorks® and QNX®
     


 

 

 

 

 

 







 

 

 

 

 

Dual Intel Xeon

Concurrent Technologies - 6U CompactPCI 2 GHz Low Voltage Pentium SBC

PP220

  • Dual 2.0GHz Low Voltage Intel Xeon processors each operating within 35W thermal envelope
  •   Up to 4 Gbytes of DRAM, 400MHz front side bus, 512 Kbytes of high-speed L2 cache
  • Dual Gigabit Ethernet ports
  • Single PMC site
  • IPMI (PICMG® 2.9) support  and PICMG 2.16 (cPSB)
  • Supports Ultra160 SCSI and an EIDE connection for CompactFlash/IBM Microdrive.  EIDE option for an on-board 2.5-inch disk drive
  • Software supported: Windows®, Linux and QNX
     




 

 

 Intel Pentium M

3U CompactPCI®/Express Pentium® M Single Board Computer

F14

  • ULV Celeron® M 373, 1GHz
  • Up to Pentium® M 760, 2GHz
  • PCI Express® 4 lanes x1
  • 4HP system master or busless
  • 32-bit CompactPCI® or cPCI Express®
  • Up to 1 GB DDR2 DRAM soldered
  • CompactFlash® or 1.8" hard disk slot
  • 2 SATA interfaces
  • Video via VGA and 2 DVI
  • 2 Gigabit Ethernet (PCIe)
  • Up to 8 USB 2.0
  • High Definition audio
  • Power consumption 11..35W
  • Prepared for rugged environments

     

6U Intel Pentium M Single Board Computer

PP332

  • Two processor versions available:
    • 1.8 GHz Intel® Pentium® M processor 745
    • 1.4 GHz Intel® Pentium® M processor Low Voltage 738:
  • Common processor features are:
    • 64 Kbytes of primary (L1) on-die cache
    • 2 Mbytes of secondary (L2) on-die cache
    • 400 MHz Front Side Bus (FSB)

       

6U CompactPCI SBC with dual PMC / XMC sites (MEN Micro)

D6c

  • Pentium® M up to 2GHz
  • ULV Celeron® M 1GHz
  • 4HP CompactPCI® system slot, 64-bit/66-MHz
  • Hot-swap, PICMG 2.9, PICMG 2.16 support
  • Up to 2GB DDR2 ECC SDRAM
  • Non-volatile SRAM, FRAM
  • Up to 1GB Flash-on-disk (NAND)
  • On-board hard disk slot
  • 2 SATA, 2 PATA interfaces
  • Graphics up to 1280x1024
  • 4 Gigabit Ethernet (PCIe)
  • 3 USB 2.0, up to 2 COM
  • Individual I/O in FPGA
  • 2 XMC/PMC slots (PCIe)

     

Concurrent Technologies Intel Pentium M Processor Intelligent Dual PMC Carrier PICMG 2.16 Compliant    

PP310/01x

  • 1.6 GHz or 1.1 GHz Intel Pentium M Processor:
    • 64 Kbytes L1 cache
    • 1 Mbyte L2 cache
    • No CPU fan needed; low power processor
  • Single slot (for all option combinations)
  • Up to 2 Gbytes of DDR DRAM (with ECC)
  • 2 x PMC module interfaces (32/64-bit and 33/66 MHz)
  • High performance EIDE interfaces with optional on-board disk drive or CompactFlash™ / Microdrive interface
  • 2 x 10/100/1000Mbps Ethernet interfaces
  • Dual 1 Gbps Packet Switching Backplane (PICMG 2.16)
  • Graphics interface
  • 32 Mbytes of Application Flash EPROM
  • Keyboard and Mouse interfaces
  • 512 Kbytes of BIOS Flash EPROM
  • 512 Kbytes of battery backed SRAM
  • CompactPCI controller:
    • operates in system slot or peripheral slot
    • 32/64-bit at 33/66 MHz CompactPCI interface
  • Option to bypass CompactPCI bus (Satellite Mode)
  • IPMI (Intelligent Platform Management Interface):
    • PICMG 2.9 (System Management Specification)
  • Up to 3 x RS232 serial channel interfaces:
    • 1 or 2 on-board
    • 2 on optional Transition Module
  • Watchdog timer and long duration timer
  • Extended temperature version available see PP 310 / 011 - E datasheet
  • Support for VxWorks®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, QNX® and Linux®
  • Optional Transition Module for rear panel I/O:
    • 2 x RS232 channels, Parallel Printer Port and floppy disk interfaces included
       


 

 

 

 

 

 



 

Concurrent Technologies Extended Temperature Intel Pentium M Processor Intelligent Dual PMC Carrier PICMG 2.16 Compliant

PP310/011-E

  • Operation over ambient temperature range -25°C to +70°C
  • 1.1 GHz Intel Pentium M Processor:
    • 64 Kbytes L1 cache
    • 1 Mbyte L2 cache
    • No CPU fan needed; low power processor
  • Single slot (for all option combinations)
  • Up to 2 Gbytes of DDR DRAM (with ECC)
  • 2 x PMC module interfaces (32/64-bit and 33/66 MHz)
  • High performance EIDE interfaces with optional on-board CompactFlash™ interface
  • 2 x 10/100/1000Mbps Ethernet interfaces
  • Dual 1 Gbps Packet Switching Backplane (PICMG 2.16)
  • Graphics interface
  • 32 Mbytes of Application Flash EPROM
  • Keyboard and Mouse interfaces
  • 512 Kbytes of BIOS Flash EPROM
  • CompactPCI controller:
    • operates in system slot or peripheral slot
    • 32/64-bit CompactPCI interface
    • 33/66 MHz operation
  • Option to bypass CompactPCI bus (Satellite Mode)
  • IPMI (Intelligent Platform Management Interface):
    • PICMG 2.9 (System Management Specification)
  • Up to 3 x RS232 serial channel interfaces:
    • 1 or 2 on-board
    • 2 on optional Transition Module
  • Watchdog timer
  • Commercial temperature version available see PP 310/01x datasheet
  • Support for VxWorks®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, QNX® and Linux®
  • Optional Transition Module for rear panel I/O:
  • 2 x RS232 channels, Parallel Printer Port, 2 x
  • Ethernet, EIDE and Floppy Disk interfaces included


 

 

 

 

 

 

 


 

Concurrent Technologies Intel Pentium M Processor 745 Intelligent Dual PMC Carrier PICMG 2.16 Compliant

PP312/01x

  • 1.8 GHz Intel Pentium M Processor 745
    • 64 Kbytes L1 cache
    • 2 Mbytes L2 cache
    • No CPU fan needed; low power processor
  • Single slot (for all option combinations)
  • Up to 2 Gbytes of DDR DRAM (with ECC)
  • 2 x PMC module interfaces (32/64-bit and 33/66 MHz)
  • High performance EIDE interfaces with optional on-board disk drive or optional Compact Flash / Microdrive interface
  • 2 x 10/100/1000Mbps Ethernet interfaces
  • Dual Gigabit Packet Switching Backplane (PICMG 2.16)
  • Graphics interface
  • 32 Mbytes of Application Flash EPROM
  • Keyboard and Mouse interfaces
  • 512 Kbytes of BIOS Flash EPROM
  • 512 Kbytes of battery backed RAM
  • CompactPCI controller:
    • operates in system slot or peripheral slot
    • 32/64-bit at 33/66 Compact PCI interface
  • Option to bypass CompactPCI bus (Satellite Mode)
  • IPMI (Intelligent Platform Management Interface):
    • PICMG 2.9 (System Management Specification)
  • Up to 3 x RS232 serial channel interfaces:
    • 1 or 2 on-board
    • 2 on optional Transition Module
  • Watchdog timer and Long duration timer
  • Commercial temperature version available see PP 310/01x datasheet
  • Support for VxWorks®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, QNX® and Linux®
  • Optional Transition Module for rear panel I/O:
    • 2 x RS232 channels, Parallel Printer Port, and Floppy Disk interfaces included

       


 

 

 

 

 

 


 

 

Concurrent Technologies 1.6 GHz or 1.1 GHz Intel® Pentium® M Processor based Dual PMC Embedded Controller VITA 31.1 Compliant

VP315/02x

  • Intel® Pentium® M Processor operating at 1.6 GHz or 1.1 GHz:-
    • 1.6 GHz uses mFC-PGA 478 (micro Flip-Chip Pin Grid Array) package
    • 1.1 GHz uses mFC-BGA 479
                     (micro Flip-Chip Ball Grid Array) package
    • 64 Kbytes of primary (Level 1) on-die cache
    • 1 Mbyte of secondary (Level 2) on-die cache
    • 400 MHz Front Side Bus (FSB)
    • 0.13 micron low power processor
  • 64 Mbytes Application Flash EPROM
  • 512 Kbytes of BIOS Flash EPROM
  • No CPU fan
  • Utilizes 64-bit Intel® 855GME chipset:-
    • supports 400 MHz bus frequency
  • Utilizes Intel® 6300ESB I/O Controller Hub
  • Intel Pentium M (ITP) debug port
  • Support for VxWorks®, Linux®, Windows® NT, Windows® 2000, Windows® XP, Windows® XP  Embedded, RTX®, QNX®, Solaris®, LynxOS® and MS-DOS®
  • PC-compatible Real Time Clock (Year 2000 compliant)
  • 2 x USB 2.0 interfaces, one via P2 connector and one via optional P0
  • Keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel and optionally via P0 connector
  • Watchdog timer
  • 1 x 32-bit Long Duration Timer with processor interrupt capability