|
ACT/Technico P2 Break Out Boards for Motorola Single Board Computers/CPUs
|
|
**Ask about special pricing when buying a Breakout Board with the matching Single Board Computer/CPU
|
|
|
|
|
Breakout Boards (BOBs)
|
|
|
MOT-BOBs
|
The MOT-BOB is a single slot P2 paddle board that provides breakout of the I/O on Motorola SBCs
Breakout Boards are used to route I/O from a Motorola Single Board Computer (SBC) to a custom cable panel
Can also be used to route I/O from a Motorola Single Board Computer (SBC) to a custom cable panel.
Better I/O density and more compact form factor than those available from Motorola
Choose between a standard Breakout Board (BoB), with active Narrow or Wide SCSI, or a Breakout Board with AUI, 10Base2,
10BaseT or 10/100 Mbit Ethernet (761 version).
|
|
|
712 Compatible P2 Break Out Boards:
|
|
MOT-BOB-1
|
BOB-1
|
- Four RS232 serial ports via RJ45 connectors
- Active SCSI terminators via 50-pin headers
- One AUI Ethernet port via a 16-pin header
|
|
|
MOT-BOB-2
|
BOB-2
|
- Four RS232 serial ports via 10-pin headers
- Active SCSI terminators via 50-pin headers
- One AUI Ethernet via 16-pin header
- One parallel port via 34-pin header
|
|
|
MOT-BOB-3
|
BOB-3
|
|
|
|
|
MOT-BOB-4A
|
BOB-4A
|
|
|
|
|
MOT-BOB-4B
|
BOB-4B
|
- One RS232 serial port via 26-pin header
- One RS422/485 serial port via 26-pin header
- Active SCSI terminators via 50-pin headers
- One AUI Ethernet port via 16-pin header mapped to DB15
- - replace AUI port with:
- MOT-BOB-4B-E2: One 10Base2 Ethernet port
- MOT-BOB-4B-ET: One 10BaseT Ethernet port
|
|
|
761 Compatible Break Out Boards:
|
|
MOT-BOB-5
|
BOB-5
|
- Two RS232 serial ports, 2 x 5 header, mapped to DB9
- One parallel port via 26-pin header, mapped to DB25
- Active SCSI II terminators via 50-pin headers
- One 10/100 Mbit Ethernet port via RJ45 connector
|
|
|
MOT-BOB-6
|
BOB-6
|
- Two RS232 serial ports, 2 x 5 header, mapped to DB9
- One parallel port via 26-pin header, mapped to DB25
- Active Wide SCSI II terminators via 68-pin headers
- One 10/100 Mbit Ethernet port via RJ45 connector
- One PMC I/O port via 64-pin header
|
|
|
Breakout Board Cable Kits
|
|
Every order typically has a different set of cable requirements. Please call us to review your exact cable requirements
and we will build a matching Cable Kit.
|
|
|
|
|
Transition Modules
|
|
TVME-761 Direct Plug Rear Transition Module
|
TVME-761
|
|
Compatible with Motorola SBCs commencing with the MVME2700
No more P2 adapters or cabling. Plugs into a direct plug
VMW backplane for more robust connectivity. Direct plug offers higher resistance to shock and vibration as compared to the standard P2 / ribbon cable connection style.
- Single slot 6U x 80mm form factor
- Includes geographical addressing
- One EIA-574 (DB9M), one EIA-574/RS422
- Using DB9M, ultra SCSI II wide (HD68F)
- 1101.10/11 style handles and gasketing
- Note: EIA-574 is the 9 pin RS232 standard
|
|
|
TVME-712 Transition Module
|
TVME-712
|
- Compatible with Motorola CPUs
- 712 Family
- 10 BaseT Ethernet or
- 10 Base2 Ethernet
- RJ45 Serial (4)
- Single slot
|
|
|
|
|
