|
Removable Storage
|
|
PMC ShuttleStor |
9270 |
|
The PMC ShuttleStor is a PMC storage solution that allows a hard drive mounted onto a carrier to
be removed through the front panel of the host board.
- One design is compatible with 1.8" - 7 mm ATA hard drives, and 2.5" - 9.5 mm ATA hard drives.
- Standard PMC Mezzanine form factor IEEE 1386.1
- On board parallel to serial ATA conversion
- SATA control logic supports Hot Swap
- Off-the-shelf device driver support
- On board Hot Plug Power conditioning
- Activity and Hot Swap Indicators on the front panel
ACT/Technico's new PMC ShuttleStor provides:
- Security. Quickly and easily remove vital data for safe keeping as the situation
demands.
- Flexibility. When storage requirements increase or drive performance is ready to be
upgraded, simply remove the existing drive and plug in the upgrade - in standard 2.5" or
1.8" form factors, rotating or solid state.
- Availability. System uptime is crucial. PMC ShuttleStor offers the
shortest mean time to repair (MTTR) in the industry - with hot swap capability. No tools required.
|
|
|
Secure Storage
|
|
Secure PMCStor
|
9247 / 9248 |
|
The Secure PMCStor is a secure solid state storage solution that provides secure erasure and/or
write-protection of sensitive data in PMC form factor. Suitable for a wide range of commercial and military applications including ground mobile, shipboard, airborne and homeland security, the Secure PMCStor
privides a unique hardware-based implementation of both data erasure and write protect. The Secure PMCStor provides two erasure levels - destructive or non-destructive. Security features can be initiated
via front panel or externally mounted switches.
- Convection or conduction cooled
- Solid state storage with rugged CompactFlash drives
- Industrial temperature operating range -45°C to +85°C
- Supports maximum capacities available in CFI form factor and CFII for most host boards
- Suitable for a wide range of commercial and military applications.
- Bootable device drivers available for Linux and VxWorks with other operating systems
available upon request.
|
|
|
Mass Storage - Conduction Cooled
|
|
CC-PMCStor - Conduction Cooled PMCStor
|
9245/9246 |
- Complete solution, with drive, interface, and software provided
- Replaces external hard drives or Disk Modules that require external fixtures or system slots
- Eliminates cables and the need to use SCSI based storage solutions
- Ultra ATA/133 mass storage solution on PMC form factor
- Uses industrial temperature range components (-40°C to +85°C degrees operating)
- 32-Kbyte Flash memory provides storage for BIOS
- Supports CompactFlash drives (CF and CF-II) allowing for enhanced environmental performance.
- Each complete unit undergoes functional testing before, during, and after a 10-cycle environmental stress screen (ESS)
to confirm reliable operation of the complete solution
- Available in two versions:
- Convection cooled extended temp with solid front panel
- Conduction cooled extended temp with no front panel
- Available optionally with conformal coating when required
|
|
|
Mass Storage -CompactFlash
|
PMCStor-G RoHS compatible
|
9275 / 9276 / 9277 / 9279 |
- Compliant with Restrictions of Hazardous Substances (RoHS) 2002/96/EC
- Designed to support one or two rugged CompactFlash drives (CFI or CFII) allowing for enhanced environmental performance in your application. MTTR is significantly reduced by using sockets that allow easy removal while clamps hold the drives in place during normal operation
- ATA/ATAPI mass storage solution implemented using the industry standard PMC form factor (IEEE P1386.1)
- An alternative to Narrow SCSI based mass storage, where SCSI capacities exceed the needs of most embedded applications
- Replaces external hard drives or Disk Modules that require external fixtures or system slots
- SiI0680 chipset supports Ultra ATA / 133 MB per second transfer rates (UDMA 6)
- 40- or 44-pin connector brings standard ATA/IDE DMA interface out the front for external drives
|
|
|
PMCStor
|
9255 |
- With bootable device drivers for Linux, VxWorks, Windows, the PMCStor
is an ideal embedded storage solution
- Removable storage
- Standard PCI Mezzanine (PMC) form factor
|
|
- Complete solution, with drive(s), interface, and software driver provided
|
9256 |
- High quality, optimized multilayer design
- 40- or 44-pin connector brings standard ATA/IDE interface out the front
- Option to bring interface out the rear of PMC
- Up to 2 GB with two IBM Microdrives® or up to 320 MB with two CF-II Drives
|
|
- Sockets are CF-II form factor
- Five versions available - see specifications for details
|
9257 |
|
|
|
|
|
9259 |
|
|
|
|
Mass Storage - High Capacity Rotating or Solid State Flash
|
SATA PMCDisk - RoHS compatible rotating or solid state Flash disk
|
9262G |
- Compliant with RoHS 2002/95/EC
- 3.3V or 5V PCI signaling
- Sil3512 chipset supports SATA/150 MB
per second transfer rates
- Supports 33/66 MHz PCI operation
- Can be used on any Single Board Computer with an industry standard IEEE P1386.1 PMC site
- Uses a 9.5 mm high 2½” ATA/IDE hard disk or a
solid state IDE Flash disk
- Rotating drives available in Extended Temperature and Enhanced Duty versions
- Flash disks available up to 128 GB, in commercial and industrial versions
- Operating temperature ranges from -40° to + 85° F
- Green LED indicator for drive activity monitoring
- Available with conformal coating
- Supports several operating systems including VxWorks, Linux, Solaris and Windows
|
 |
PMCDisk-G - RoHS compatible rotating or solid state Flash disk
|
9261 |
- Compliant with the Restriction of Hazardous
Substances Directive (RoHS) 2002/95/EC
- PCI680 chipset supports Ultra ATA/133 MB per second transfer rates (UDMA 6)
- Can be used on any Single Board Computer with an industry standard IEEE P1386.1 PMC site
- Uses a 9.5 mm high 2½” ATA/IDE hard disk or a
solid state IDE Flash disk
- Rotating drives available in Extended Temperature and Enhanced Duty versions
- Flash disks available up to 128 GB; in commercial and industrial versions
- Operating temperature ranges from -40° to + 85° F
- Available with conformal coating
- 3.3V or 5V PCI signaling
- Supports several operating systems including VxWorks, Linux, Solaris and Windows
|
 |
|
PMCDisk - Rotating or Solid State Flash disks
|
|
- Standard PMC form factor (IEEE P1386.1)
- Can be used on any SBC with a PMC slot
- ATA/IDE mass storage solution
- Extended temperature (up to +85C) and enhanced shock versions
- Conduction cooled version available
- Uses a 9.5 mm high 2.5 inch ATA/IDE hard disk or Solid State 2½" IDE Flash disk
- 3.3 V power not required - 5V tolerant signaling
- Boot and run most OS including Linux, Solaris, VxWorks and Windows
- Rotating Media from 10GB to 60GB
- Solid State Media available up to 17GB
- Open Boot Module supported to allow the PMCDisk to boot on any PCI-compliant SPARC platform
- ATA disks available in Enhanced Duty cycle versions for NEBS Level 3 - 7/24 requirements
- Please look at our other Mass Storage products, listed under
Disk Modules and STORAGE
|
9260 - Solid State
9260 - Rotating
|
