Products and Services for Embedded Computing

VMEbus Single Board Computers
Pentium

We have a new website. Please go to the new page for

               the most up to date information:

           Intel Architecture based VMEbus SBCs

AppliPak

 Intel Pentium III

 Intel Pentium M

CoreDuo

Pentium

 Intel Pentium III

6U VME64 Pentium® III SBC with dual PMC sites

A13c

  • Pentium® III (Celeron®) up to 933MHz
  • 1-slot 64-bit VME master or slave
  • 512MB DRAM, CompactFlash®
  • Graphics
  • Gigabit Ethernet
  • USB
  • Quad UART
  • Further I/O via transition module (e.g. TFT/video, audio)
  • 2 PMC slots
  • Optional on-board hard disk (IDE)

     

Concurrent Technologies 6U VME Pentium III Low Power Single Board Computer

VP101/01x

  • 933 MHz or 800 MHz Intel Pentium III processor - Low Power:
    • 32 Kbytes L1 cache
    • 512 Kbytes L2 cache
    • no CPU fan needed
  • Up to 1.5 Gbytes of 133 MHz ECC SDRAM
  • High performance EIDE interfaces with optional on-board 1.8 inch disk drive or optional CompactFlash or MicroDrive (in a single slot)
  • Ultra Wide SCSI interface
  • 2 x 10/100Mbps Ethernet interfaces
  • 64-bit PMC module interface, operating at up to 66 MHz
  • Expansion connector for dual site PMC carrier board
  • Graphics interface
  • PS/2 Keyboard and Mouse port
  • 512 Kbytes of BIOS Flash EPROM
  • 2 x asynchronous RS232 serial channels
  • Floppy disk interface
  • 1 x Parallel Printer Port (ECP, EPP and IEEE1284)
  • Watchdog timer
  • Long Duration Timer
  • 2 x Universal Serial Bus (USB) ports
  • VME-64 Interface supporting:
    • A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with
    • support for fast hardware byte-swapping
  • Single slot
  • Extended temperature version available, see VP 101/01x-E/K datasheet
  • Support for VxWorks®, Windows NT®, Windows® 2000,
  • Windows® XP, Windows XP Embedded, RTX®, Linux®, QNX® and MS-DOS®
     


 

 

 

 

 

 

 

Concurrent Technologies Extended Temperature 6U VME Pentium III Low Power Single Board Computer

VP101/01x - E or - K

  • Operation over ambient temperature range:
    • E version, -25°C to +70°C
    • K version, -40°C to +85°C (includes humidity seal)
  • 800 MHz Intel® Pentium® III Processor - Low Power:
    • 32 Kbytes L1 cache
    • 512 Kbytes L2 cache
    • no CPU fan needed; low power processor
  • Up to 1.5 Gbytes of 133 MHz ECC SDRAM
  • High performance EIDE interfaces with optional
  • CompactFlash (in a single slot)
  • Ultra Wide SCSI interface
  • 2 x 10/100Mbps Ethernet interfaces
  • PMC module interfaces(32/64-bit and 33/66 MHz):
    • Expansion carrier for 2 more PMC sites
  • Graphics interface
  • PS/2 Keyboard and Mouse port
  • 512 Kbytes of BIOS Flash EPROM
  • 2 x asynchronous RS232 serial channels
  • Floppy disk interface, parallel printer interface
  • Watchdog timer, Long Duration Timer
  • 2 x Universal Serial Bus (USB) ports
  • VME-64 Interface supporting
  • A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with
  • Support for fast hardware byte-swapping
  • Single slot
  • Commercial temperature version available, see VP 101/01x datasheet
  • Support for VxWorks®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, Linux®, QNX® and MS-DOS®
     


 

 

 

 

 

 

 

Concurrent Technologies 6U VME Intel Pentium III Processor - Low Power Embedded Controller

VP110/01x

  • 933 MHz or 800 MHz Intel Pentium III processor - Low Power:
    • 32 Kbytes L1 cache
    • 512 Kbytes L2 cache
    • No CPU fan needed
  • Up to 1 Gbyte of 133 MHz Synchronous ECC DRAM
  • High performance EIDE interfaces with optional on-board
  • disk drive or optional CompactFlash or Microdrive (in a
  • single slot)
  • 2 x PMC module interfaces(32/64-bit at 33/66 MHz):
    • Expansion carrier for 2 more PMC sites
  • 2 x 10/100 Mbps Ethernet interfaces
  • 64 Mbytes of Application Flash EPROM
  • 512 Kbytes of BIOS Flash EPROM
  • 512 Kbytes of battery backed SRAM
  • Keyboard and Mouse interface
  • 1 x asynchronous RS232 serial channel
  • Floppy disk interface
  • Watchdog timer
  • Long Duration Timer
  • 1 x Universal Serial Bus (USB) port
  • VME-64 Interface supporting
  • A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with
  • support for fast hardware byte-swapping
  • Single slot
  • Extended temperature version available, see VP 110/10-E/K datasheet
  • Support for VxWorks®, Linux®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, QNX® and MS-DOS®
     


 

 

 

 

 

 

Extended Temperature Concurrent Technologies 6U VME Intel Pentium III Processor - Low Power Embedded Controller

VP110/01x - E or -K

  • Operation over ambient temperature range:
    • E version, -25°C to +70°C
    • K version, -40°C to +85°C (includes humidity seal)
  • 800 MHz Intel Pentium III processor - Low Power:
  • 32 Kbytes L1 cache
  • 512 Kbytes L2 cache
  • no CPU fan needed; low power processor
  • Up to 1 Gbyte of 133 MHz Synchronous ECC DRAM
  • High performance EIDE interfaces with optional
  • CompactFlash (in a single slot)
  • 2 x PMC module interfaces(32/64-bit and 33/66 MHz):
    • Expansion carrier for 2 more PMC sites
  • 2 x 10/100 Mbps Ethernet interfaces
  • 64 Mbytes of Application Flash EPROM
  • 512 Kbytes of BIOS Flash EPROM
  • Keyboard and Mouse interface
  • 1 x asynchronous RS232 serial channel
  • Floppy disk interface
  • Watchdog timer, Long Duration Timer
  • 1 x Universal Serial Bus (USB) port
  • VME-64 Interface supporting
  • A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with support for fast hardware byte-swapping
  • Single slot
  • Commercial temperature version available, see VP 110/01x datasheet
  • Support for VxWorks®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, Linux®, QNX® and MS-DOS®
     


 

 

 

 

 



 

 Intel Pentium M

Concurrent Technologies 6U VME Pentium M Processor Single Board Computer (VP305 / 011 and VP305 / 012) VITA 31.1 Compliant

VP305/01x

  • 1.6 GHz or 1.1 GHz Intel Pentium M processor:
    • 64 Kbytes L1 cache
    • 1 Mbyte L2 cache
    • improved P4 architecture
    • No CPU fan needed; low power processor
  • Up to 1.5 Gbytes of DDR DRAM (with ECC)
  • High performance EIDE interfaces with optional
  • on-board disk drive (in a single slot)
  • Supports optional CompactFlash or MicroDrive
  • 1 x 10/100Mbps Ethernet interface (front panel)
  • 2 x 10/100/1000Mbps Ethernet interfaces:
    • P2 I/O or Ethernet on VME64x backplanes (VITA 31.1)
  • 32 Mbytes Application flash EPROM
  • 512 Kbytes of BIOS Flash EPROM
  • Floppy disk interface
  • Front panel and P2 I/O combinations available:
    • Analog and digital graphics interfaces
    • Keyboard and mouse interfaces
    • 2 x asynchronous RS232/RS422/RS485 serial channels
    • 2 x Universal Serial Bus (USB) ports
  • 64-bit PMC module interface, operating up to 66 MHz
  • Expansion connector for dual site PMC carrier board
  • Watchdog timer and Long Duration Timer
  • VME64 Interface supporting
  • A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with support for fast hardware byte-swapping
  • Single slot
  • Extended temperature version available, see VP 305/01x-E/K datasheet
  • Support for Windows NT®, Windows® 2000, Windows®, XP, VxWorks® , Linux® and QNX®
     


 

 

 

 

 



 

Extended Temperature Concurrent Technologies 6U VME Pentium M Processor Single Board Computer VITA 31.1 Compliant

VP305/011 - E

  • Operation over ambient temperature range -25°C to +70°C
  • 1.1 GHz Intel Pentium M Processor:
    • 64 Kbytes L1 cache
    • 1 Mbyte L2 cache
    • Improved P4 architecture
    • No CPU fan needed; low power processor
  • Up to 1.5 Gbytes of DDR SDRAM (with ECC)
  • High performance EIDE interfaces with optional on-board
  • CompactFlash interface
  • 1 x 10/100Mbps Ethernet interface (front panel)
  • 2 x 10/100/1000Mbps Ethernet interfaces:
    • P2 I/O or Ethernet on VME64x backplanes (VITA 31.1)
  • 32 Mbytes Application flash EPROM
  • 512 Kbytes of BIOS Flash EPROM
  • 64-bit PMC module interface, operating up to 66 MHz
  • Expansion connector for dual site PMC carrier board
  • Floppy disk interface
  • Front panel and P2 I/O combinations available:
    • analog and digital graphics interfaces
    • keyboard and mouse interfaces
    • 2 x asynchronous RS232/RS422/RS485 serial channels
    • 2 x Universal Serial Bus (USB) ports
  • Watchdog timer and Long Duration Timer
  • VME64 Interface supporting A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with support for fast hardware byte-swapping
  • Single slot
  • Commercial temperature version available, see to VP 305/01x datasheet
  • Support for VxWorks®, Linux®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, QNX® and MS-DOS®
     


 

 

 

 


 

Concurrent Technologies 1.8 GHz Intel Pentium M Processor 745 based Single-Slot VME board VITA 31.1 Compliant

VP307/011

  • 1.8 GHz Intel® Pentium® M processor 745:-
    • Uses µFC-PGA 478 (micro Flip-Chip Pin Grid Array) package
    • 400 MHz Front Side Bus
    • 64 Kbytes of primary (L1) on-die cache
    • 2 Mbytes of secondary (L2) on-die cache
    • no CPU fan; low power processor
  • Utilizes 64-bit ServerWorks' GC-LE chipset
  • Supporting up to 1.5 Gbytes of DDR ECC SDRAM:-
    • 512 Mbytes soldered on-board DRAM
    • up to 1 Gbyte provided via a SODIMM socket
    • error correction up to 4-bits
  • Accessible from Intel Pentium M processor 745 or VME bus
  • ITP debug port
  • Keyboard and mouse interfaces via a single PS/2™ type connector on front panel and via P2 connector (see Note)
  • Floppy disk interface via P2 connector
  • 2 x USB (Universal Serial Bus) interfaces:-
    • 1 x USB interface accessed via a USB connector on front panel
    • 1 x USB interface via P2 connector (see Note)
  • 3 x General Purpose I/O bits via P2 connector (see Note)
  • Speaker interface via P2 connector
  • PC-compatible Real Time Clock (Year 2000 compliant)
  • WWatchdog timer
  • 1 x 32-bit Long Duration Timer with processor interrupt capability
  • Support for Linux®, Windows® NT, Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, VxWorks®, QNX®, Solaris® and MS-DOS®
     


 

 

 

 

 


 

Concurrent Technologies 1.6 GHz or 1.1 GHz Intel® Pentium® M Processor based Dual PMC Embedded Controller VITA 31.1 Compliant

VP315/02x

  • Intel® Pentium® M Processor operating at 1.6 GHz or 1.1 GHz:-
    • 1.6 GHz uses mFC-PGA 478 (micro Flip-Chip Pin Grid Array) package
    • 1.1 GHz uses mFC-BGA 479
                     (micro Flip-Chip Ball Grid Array) package
    • 64 Kbytes of primary (Level 1) on-die cache
    • 1 Mbyte of secondary (Level 2) on-die cache
    • 400 MHz Front Side Bus (FSB)
    • 0.13 micron low power processor
  • 64 Mbytes Application Flash EPROM
  • 512 Kbytes of BIOS Flash EPROM
  • No CPU fan
  • Utilizes 64-bit Intel® 855GME chipset:-
    • supports 400 MHz bus frequency
  • Utilizes Intel® 6300ESB I/O Controller Hub
  • Intel Pentium M (ITP) debug port
  • Support for VxWorks®, Linux®, Windows® NT, Windows® 2000, Windows® XP, Windows® XP  Embedded, RTX®, QNX®, Solaris®, LynxOS® and MS-DOS®
  • PC-compatible Real Time Clock (Year 2000 compliant)
  • 2 x USB 2.0 interfaces, one via P2 connector and one via optional P0
  • Keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel and optionally via P0 connector
  • Watchdog timer
  • 1 x 32-bit Long Duration Timer with processor interrupt capability
     


 

 

 

 

 

6U VME Intel Pentium M Single Board Computer

VP347

  • 1.4 or 1.8 GHz Intel® Pentium® M processor 745
  • No CPU fan
  • Up to 2 Gbytes 333 MHz DDR ECC SDRAM
  • Ultra-SCSI 8-bit and Ultra Wide SCSI 16-bit via P2 connector
  • EIDE interface via P2 connector supports up to Ultra-DMA 100
  • 2 x 10/100/1000 Base-T Ethernet connectors
  • Analog and flat panel graphics support via front panel
  • 2 x RS232 serial interfaces
  • One PMC slot with I/O via front panel and optionally via P0
  • 4 x USB 2.0 (Universal Serial Bus) interfaces:-
  • Keyboard and mouse interfaces via front panel
  • Floppy disk and parallel printer port interfaces via P2 connector
  • Support for VxWorks®, Windows®, RTX®, Linux®, Solaris®, LynxOS®, QNX® and MS-DOS®
  • Operating temperatures:
    • 0°C to +55°C (N-Series: 1.8 GHz, 1.4 GHz)
    • -25°C to +70°C (E-Series: 1.4 GHz)
    • -40°C to +85°C (K-Series: 1.4 GHz)

       

Core Duo

6U VME Intel Core Duo Single Board Computer

VP405

 

 

  • 1.66 or 2.0 GHz Intel® Core™ Duo processor (originally called Yonah)
  • Low power processor; no CPU fan
  • Dual channel architecture, up to 4 Gbytes of 667MHz DDR2 SDRAM
  • Compatible with VME64x and VXS (VITA 41.3)
  • 1 x PMC/XMC slot
  • 2 x EIDE interfaces, up to Ultra-DMA 100 support
  • 2 x rear I/O interfaces:
  • 2 x 10/100/1000Mbps Ethernet channels when P0 not fitted, accessed via P2 for either VME64x or VXS backplanes; or 2 x 1000Mbps IEEE 802.3 backplane ports, accessed via VXS P0 connector for VITA 41.3 on a VXS backplane
  • 1 x Ethernet channel accessed via front panel RJ45 connector:-
  • Analog VGA and flat panel supported via P2 connector
  • P0 supports High Definition Audio (HDA) Codec on breakout
  • 2 x asynchronous serial channels user configurable for RS232, RS422 or RS485
  • Keyboard and mouse interfaces
  • 5 x USB 2.0 (Universal Serial Bus) interfaces:-
  • Support for Linux®, Windows®, VxWorks® and QNX®
  • Operating temperatures:
    • 0°C to +55°C (N-Series: up to 2.0 GHz)
    • -25°C to +70°C (E-Series: 1.66 GHz)
    • -40°C to +55°C (J-Series: 1.66 GHz)

       

6U VME/VXS  2.16 MHz Intel Core 2 Duo Single Board Computer

VX407

  • 2.16 GHz Intel® Core™ 2 Duo processor T7400:-
  • Dual-core CPU
  • 667 MHz Front Side Bus
  • 64 Kbytes of primary (L1) on-die cache
  • 4 Mbytes of shared secondary (L2) on-die cache
  • Intel® 64 (or Intel® EM64T) 64-bit computing support 
  • 2.0 GHz and 1.66 GHz Core Duo processor versions available; see PP410 datasheet
  • Supports up to 4Gbytes DDR2-400 ECC SDRAM
  • 2 rear Gigabit Ethernet ports
  • 1 front panel Gigabit Ethernet port
  • 2 x EIDE interfaces
  • 5 x USB 2.0 (Universal Serial Bus) interfaces
  • Up to 3 x RS232 serial channels:
  • 1 x Tx/Rx channel accessed via a 26-way high-density connector on front panel
  • 1 or 2 Tx/Rx channels via Transition Module
  • Operating temperature:
    • 0°C to +55°C (N-Series)
  • For extended temperature operation see PP410 datasheet