PMC I/O Digital
FPGA Serial Controller Card with Front and Rear I/O
Model 8046
  • Single PMC slot (IEEE 1386.1-2001) with front I/O and rear I/O
  • Optional PIM8046 (VITA 36) for rear I/O connections
  • Xilinx FPGA softcore PCI interface
  • 16C650 compatible host interface
  • PCI interface:
    • PCI 2.1 compliant
    • 33MHz, 32-bit interface
    • 3.3V and 5.0V signaling supported 5V supply
  • 8 serial RS422 channels with Rx, Tx, RTS and CTS at 68-pin front or 64-pin rear connector
  • Dipswitch selectable line termination

Download Datasheet

 

32-Channel Digital I/O with 30-ns Timestamp Counter
Model 8051
  • Provides 32-bits of bi-directional, parallel accessed I/O
  • Slave only PCI bridge
  • Time Stamp FIFO
  • Rear I/O accessed via 64-pin JN4 connector
  • Status LED indicators front panel

Download Datasheet

96-Channel Reconfigurable Digital I/O with 10K70
Model 8052
  • 32-bit PCI bus with PCI to Local Slave bridge
  • Altera Flex 10K FPGA
  • 32 I/Os accessible thru via 68-pin connector on front panel
  • 68 I/Os accessible via 64-pin rear connector

Download Datasheet

 

32-Channel Reconfigurable RS422/RS485 Digital I/O with 10K70
Model 8053
  • 32-bit PCI to Local Bus Master Bridge
  • Altera Flex 10K70 FPGA
  • For designs requiring differential interface
  • 32 RS422/RS485 I/Os
  • I/O accessible via front by 68-pin connector
  • I/O accessible via rear by 64-pin PN4 connector

Download Datasheet

32-Channel Reconfigurable RS422/RS485 Digital I/O with 10K70-2
Model 8054
  • 32-bit PCI to Local Bus Master Bridge
  • Altera Flex 10K70-2 FPGA
  • For designs requiring differential interface
  • 32 RS422/RS485 I/Os
  • I/O accessible via front by 68-pin connector
  • I/O accessible via rear by 64-pin PN4 connector

Download Datasheet

80-Channel Reconfigurable Digital I/O
Model 8055
  • Enables designs requiring high speed single ended operation
  • 32-bit PCI to Local Bus Master Bridge
  • Altera Flex 10KE100 FPGA
  • 64 of 80 I/O lines accessible via rear Pn4 connector
  • All 80 I/O lines available via 80-pin front panel connector

Download Datasheet

Enhanced 32-channel Reconfigurable RS422/RS485 Digital I/O PMC
Model 8056
  • Provides 32 Channels of General-purpose
  • Digital I/O Second-generation enhanced Design
  • Supports 64 bit / 66 MHz PCI Bus
  • FPGA-based
  • Reprogrammable by Host or On-board Flash (EP1CS4)
  • Variable SRAM Architectures Allowed
  • Headers for JTAG Connection and FLASH Programming
  • Sample FPGA Implementation and Host "C" Code

Download Datasheet