Systems by Design - Embedded Computing Solutions
ACT/Technico supplies products and services to the embedded computing industry.
Tel.: 215-956-1200
:: Toll free: 800-445-6194 ::
Serial Ports:
2-port , 4-port, 8-port, or 16-port
2-port , 4-port, 8-port, or 16-port
- 4, 8, and 16-port serial products
- 300K to 115K operation using standard 16550 UARTS
- 68-pin front I/O connector; rear I/O optional
- Full software support: RTOS, UNIX, Windows NT
2-Port
2-port RS232/4522/485 Asynchronous Communications
Model 8005
Model 8005
- Low cost solution to provide additional ports for a CPU
- Each port can be set up independently to RS232 or RS422 levels
- RS422 provides option for data transmit/receive in RS485 mode
- Provides two 16550-based UARTs up to 155K-baud
- Ports are available via the front panel using DB-9 connector
4-Port
4-port RS232/422/485 Asynchronous Serial Communications
Model 8012
Model 8012
- Provides sixteen 16550-based UARTs using RS422 or RS485 signaling
- Each port provides two differential pairs of RS485 data
- PLD between UART and RS485 permits variety of interfaces
- I/O accessed via 68-pin SCSI connector on front panel
- Rear I/O provided by wiring all ports to the P4 connector
4-ports each RS232 & RS422 Asynchronous Communications
Model 8013
Model 8013
- Provides eight 16550 UARTS with 4 ports RS232 and 4 ports RS422
- RS232 ports provide full set of data for DTE operation
- RS422 ports provide two differential inputs and two differential outputs
- All 8 ports available through front panel via 68-pin SCSI connector
- Rear I/O provided through PN4 connector via the J2 VMEbus connector
4-port Multi Function RS422/RS485 Digital I/O with 10K70
Model 8017
Model 8017
- Multiple functions provided on a single card:
- Two 16550-based UARTs, one RS422 and one RS485 provide:
- Asynchronous communication at 115K baud
- TXD, RXD, CTS, and RTS controls
- 16 general purpose digital I/O lines based on Zilog 8536 chip
- Temperature sensor
- Front I/O accessed via 50-pin SCSI connector on front panel
- Rear I/O provided through PN4 connector
8-Port
8-port RS232 Asynchronous Serial Communications
Model 8010
Model 8010
- Provides eight 16550-based UARTs using RS232 signaling
- UARTS operate at 300 baud to 115 Kbaud
- I/O accessed via 68-pin SCSI connector on front panel
- Rear I/O provided by wiring all ports to the P4 connector
8-port RS422 Asynchronous Serial Communications
Model 8016
Model 8016
16-Port
16-port RS232 Asynchronous Serial Communications
Model 8011
Model 8011
- Provides sixteen 16550-based UARTs using RS232 signaling
- UARTS operate at 300 baud to 115 Kbaud
- I/O accessed via 68-pin SCSI connector on front panel
- Rear I/O provided by wiring all ports to the P4 connector
16-port RS232 Serial Communications
Model 8038
Model 8038
- Provides sixteen 16550-based UARTs using RS232 signaling
- UARTS operate at 300 baud to 115 Kbaud
- Interrupt requests from each UART routed to 1 of 4 INTx on PCIbus
- I/O accessed via 68-pin SCSI connector on front panel
- Rear I/O provided by wiring all ports to the P4 connector
24-Port
FPGA-based 16/24 channel serial communication controller card
Model 8047
Model 8047
- Single PMC slot (IEEE 1386.1-2001) with front I/O and rear I/O
- Optional PIM8047 (VITA 36) for rear I/O connections
- Xilinx FPGA softcore PCI interface
- 16C550 compatible host interface
- Software configurable line interface per channel
- UART16-configuration: Rx, Tx, RTS and CTS for each RS232 interface and Rx and Tx for each RS422/RS485 interface
- UART24-configuration: 16 channel Rx and Tx RS232 interface, and 8 channel Rx, Tx, RTS and CTS for each RS232 interface and Rx and Tx for each RS422/RS485 interface
- FIFO depth 512 Bytes
- Baudrate RS232 up to 250kbps, for RS422/RS485 higher
- RS485/RS422 true fail-safe receivers
- PCI interface: PCI 2.1 compliant, 33MHz, 32-bit interface, 3.3V signalling and 3.3V supply
- Dipswitch selectable line termination
- Operating temperature of the 8047 is -40°.. +85°
