Systems by Design - Embedded Computing Solutions
ACT/Technico supplies products and services to the embedded computing industry.
Tel.: 215-956-1200
:: Toll free: 800-445-6194 ::
CompactPCI
| 6U CompactPCI | 3U CompactPCI |
 Intel Core 2 Duo |
Intel Core 2 Duo |
Extended temperature
Intel Core 2 Duo processor L7400
1.5 GHz Single Board Computer
Model PP432/051-E
Model PP432/051-E
- -20C to +70C Operating Temperature
- 1.5 GHz Intel® Core™ 2 Duo processor L7400
- Supports up to 4 Gbytes DDR2-400 ECC SDRAM
-
4 x SATA-150 interfaces:
-
2 channels accessible via J5
-
optional 2.5 inch SATA hard disk drive assemblies in a single slot (uses PMC site)
-
support for CompactFlash™ site under PMC site via SATA to PATA convertor
-
- 4 x channels supporting 10/100/1000
Ethernet
- Support for PICMG 2.16 R1.0 - Packet Switching Backplane (PSB)
- 2 x PMC sites, supporting 32/64-bit, 33/66/100 MHz PCI/PCI-X operation and 3.3V PCI signaling level
- 2 x RS232 Tx/Rx serial channels and 16550 compatible UARTs
- 4 x USB 2.0 interfaces
- PICMG 2.9 R1.0 (System Management Specification) supports on-board Baseboard Management Controller
- Support for Linux®, Windows® XP, Windows® 2000, Windows® XP Embedded, Windows® Server 2003, QNX® VxWorks® and Solaris™
Extended temperature Intel Core 2 Duo processor T7400 1.5 GHz Single Board Computer
Model PP412/051-E
Model PP412/051-E
- -20C to +70C Operating Temperature
- 1.5 GHz Intel® Core™ 2 Duo processor T7400
- Supports up to 4 Gbytes DDR2-400 ECC SDRAM
-
2 x SATA-150 interfaces:
-
2 channels accessible via J5
-
optional 2.5 inch SATA hard disk drive assemblies in a single slot (uses PMC site)
-
support for CompactFlash™ site under PMC site via SATA to PATA convertor
-
- 4 x channels supporting 10/100/1000
Ethernet
- Support for PICMG 2.16 R1.0 - Packet Switching Backplane (PSB)
- 2 x PMC sites, supporting 32/64-bit, 33/66/100 MHz PCI/PCI-X operation and 3.3V PCI signaling level
- 2 x RS232 Tx/Rx serial channels and 16550 compatible UARTs
- 4 x USB 2.0 interfaces
- PICMG 2.9 R1.0 (System Management Specification) supports on-board Baseboard Management Controller
- Support for Linux®, Windows® XP, Windows® 2000, Windows® XP Embedded, Windows® Server 2003, QNX® VxWorks® and Solaris™
Extended temperature RoHs compliant 1.66 GHz Intel Core Duo L2400 Single Board Computer
Model PP410/031-E
Model PP410/031-E
- -20C to +70C Operating Temperature
- 1.66 GHz Intel Core Duo processor L2400
-
667 MHz Front Side Bus
-
64 Kbytes of primary (L1) on-die cache
-
2 Mbytes of secondary (L2) on-die cache
-
- Intel® E7520 server class chipset
- Up to 4 Gbytes DDR2-400 ECC SDRAM
- 4 x channels supporting 10/100/1000 Ethernet
- 2 x SATA-150 interfaces
- Optional audio and graphics interface via PMC carrier
- 3 x serial interfaces, 16550 compatible UARTs
- Support for PICMG 2.16 R1.0 - Packet Switched Backplane (PSB)
- 2 x PMC sites: 32/64-bit, 33/66 MHz PCI operation and 3.3V signaling levels
- Transition Module provides rear I/O for both PMC sites
Extended temperature RoHs compliant 1.5 GHz Intel Core Duo L7400 Single Board Computer
Model PP402/041-E or -K
Model PP402/041-E or -K
- -20C to +70C or -40C to +85C Operating Temperatures
- 1.5 GHz Intel Core Duo processor L7400
-
667 MHz Front Side Bus
-
64 Kbytes of primary (L1) on-die cache
-
4 Mbytes of secondary (L2) on-die cache
-
- Intel® 64-bit Intel® 945GME Express chipset
- Up to 4 Gbytes DDR2-400 ECC SDRAM
- 4 x channels supporting 10/100/1000 Ethernet
- 1 x EIDE and 2 x SATA-150 interfaces
- Front panel accessible graphics interface
- 2 x serial interfaces, 16550 compatible UARTs
- 1 x PMC site: 32/64-bit, 33/66/100 MHz PCI/PCI-X operation and 3.3V signaling levels
- Transition Module provides rear I/O for both PMC sites
Extended temperature RoHs compliant 1.6 GHz Intel Pentium M Processor 738 based Single Board Computer
Model PP332/02x-U
Model PP332/02x-U
- -40C to +85C Operating Temperature PP332/02x-U
- 1.6 GHz processor version (1 Mbyte L2 cache) available
- 64 Kbytes of primary (L1) on-die cache
- 2 Mbytes of secondary (L2) on-die cache
- 400 MHz Front Side Bus (FSB)
- 64-bit Intel® 855GME chipset
- Up to 2 Gbytes 333 MHz DDR ECC SDRAM
- 4 x channels supporting 10/100/1000 Ethernet
- 2 x channels accessed via J3 and 2 x channels via front panel RJ45 connectors:
- Support for rear panel RJ45 connectors via Transition Module
- Support for PICMG 2.16 R1.0 - Packet Switched Backplane (PSB)
- 2 x PMC sites with 32/64-bit, 33/66 MHz PCI operation and 3.3V signaling levels
- Transition Module provides rear I/O for both PMC sites
Extended temperature RoHs compliant 1.66 GHz Intel Core Duo L2400 Single Board Computer
Model PP302/020-EU or -KU
Model PP302/020-EU or -KU
- -20C to +70C or -40C to +85C Operating Temperatures
- 1.4 GHz Intel Low voltage Pentium M processor 738
- Intel® 64-bit Intel® 855GME chipset
- Up to 2 Gbytes DDR2-400 ECC SDRAM
- 4 x channels supporting 10/100/1000 Ethernet
- 2 x EIDE Ultra-DMA 100 interfaces
- 3 x serial interfaces, 16550 compatible UARTs
- 2 x PMC sites: 32/64-bit, 33/66 MHz PCI operation and 3.3V signaling levels
- Transition Module provides rear I/O for both PMC sites
3U Air-Cooled or Conduction Cooled cPCI 1.5 GHz Core 2 Duo Single Board Computer
Model TP402/351-RA or -RC series
Model TP402/351-RA or -RC series
- 1.5 GHz Intel® Core™ 2 Duo processor L7400:
-
64 Kbytes of primary (L1) on-die cache
-
4 Mbytes of shared secondary (L2) on-die cache
-
667 MHz Front Side Bus (FSB)
- 2 or 4 Gbytes soldered DDR2-400 registered ECC SDRAM
-
Serial ATA150 interfaces with transfer rate up to 150 Mbytes/s
-
2 10/100/1000 Ethernet interfaces
- Optional graphics interface via PMC on a carrier
- 2 serial interfaces accessible via J2
-
1 Mbyte of BIOS Flash EPROM; hardware write protect provided
-
Universal signaling support, compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels
-
33/66 MHz; 32-bit interface accessed via J1
-
Utilizes a PCI Express-PCI bridge for off-board accesses
- Operates as a System Slot controller (supporting up to 7 peripheral slots) or operates in a Peripheral Slot:
- Supports hot-swapping peripheral boards
- PICMG 2.1 R2.0 Hot Swap Specification
- Available in ruggedized air- or conduction cooled versions
3U Extended Temperature Range cPCI 1.5 GHz Core 2 Duo Single Board Computer
Model TP402/351-E or -K series
Model TP402/351-E or -K series
- 1.5 GHz Intel® Core™ 2 Duo processor L7400:
-
64 Kbytes of primary (L1) on-die cache
-
4 Mbytes of shared secondary (L2) on-die cache
-
667 MHz Front Side Bus (FSB)
- 2 or 4 Gbytes soldered DDR2-400 registered ECC SDRAM
-
Serial ATA150 interfaces with transfer rate up to 150 Mbytes/s
-
2 10/100/1000 Ethernet interfaces
- Optional graphics interface via PMC on a carrier
- 2 serial interfaces accessible via J2
-
1 Mbyte of BIOS Flash EPROM; hardware write protect provided
-
Universal signaling support, compliant with PICMG 2.0 R3.0; 3.3V or 5V signaling levels
-
33/66 MHz; 32-bit interface accessed via J1
-
Utilizes a PCI Express-PCI bridge for off-board accesses
- Operates as a System Slot controller (supporting up to 7 peripheral slots) or operates in a Peripheral Slot:
- Supports hot-swapping peripheral boards
- PICMG 2.1 R2.0 Hot Swap Specification
Download Datasheet
3U CompactPCI - Intel Pentium M
3U Extended Temperature Range cPCI 1.4 GHz Pentium M Single Board Computer
Model TP302/320-E or -K series
Model TP302/320-E or -K series
- Low voltage 1.4 GHz Pentium M 738 processor with :
-
64 Kbytes of primary (L1) on-die cache
-
2 Mbytes of secondary (L2) on-die cache
-
400 MHz Front Side Bus (FSB)
- 1 Gbyte 333 MHz DDR SDRAM soldered onboard
- Ultra-DMA 100 EIDE and 2 Serial ATA150 interfaces
- 2 10/100/1000 Ethernet interfaces
- Audio and graphics interfaces
- 4 serial interfaces, 16550 compatible UARTs
- Support for PICMG 2.16 R1.0 - Packet Switched Backplane (PSB)
3U Conduction Cooled cPCI Single Board Computer
Model 6800 series
Model 6800 series
- MPC7447A 1GHz microprocessor with :
- L1 cache : 32KB Inst. and 32KB Data with parity
- 512KB of L2 integrated cache with ECC
- Or MPC7448 1.4GHz Processor with :
- L1 cache : 32KB Inst. and 32KB Data with parity
- 1 MB of L2 integrated cache with ECC
- 256 or 512MB SDRAM-DDR with ECC
- 64MB soldered Mirror Flash
- Up to 1 GB soldered Nand Flash
- 2 MB (128-bit access wide) of high speed SRAM
- 32K-word of FRAM (non-volatile memory)
- PPC Real Time clock and four 32 bit-timers
- Calendar clock with supercap backup
- Temperature sensor and monitoring
- Marvell DiscoveryTM III system controller:
- Two Ethernet 10/100/1000TX ports with:
- One multi-purpose serial interface on J2
- One USB2 controller with an internal hub
- Two high/full speed ports routed on J2
- 4 GPIO on J2
- One 32/64-bit PMC slot with Pn4 (46 IO) routed on J2
6U Conduction cooled cPCI Single Board Computer
Models 6810/6811
Models 6810/6811
- MPC7448 running at 667 or 1.4 GHz with:
- L1 caches : 32KB Inst. and 32KB Data with parity
- 1MB of L2 integrated cache with ECC
- 512MB , 1 or 2GB of SDRAM-DDR with ECC
- 64, 128 or 256MB of soldered Mirror Flash
- Up to 1 GB soldered Nand Flash
- 256KB (128-bit wide access) of high speed SRAM
- 128KB or 1MB BSRAM (non-volatile memory)
- PPC Real Time clock and four 32 bit-timers
- Calendar clock with supercap backup
- Temperature sensor and monitoring
- 32 or 64-bit CompactPCI bus interface
- two PMC sites with IO routing toward J3 / J5
- Marvell DiscoveryTM III system controller
- Three Ethernet 10/100/1000TX ports with:
- support for Jumbo frames
- Virtual Cable Tester on line
- Two routed on rear J3 and one on the front panel
- Three Ethernet 10/100/1000TX ports with:
- One serial interface for the front console port
- One USB2 controller with two rear and one front port
- GPIO on J3/5
- A four channels SATA controller with two ports on J3 and two ports available through an on-board planar connector
- Rear transition module with rear I/O for 2 GigE RJ45, 2 USB2, 4 RS232/RS422 ports, 2 SATA and one on-board high density connector for the PMC IO