• Supports 667 MHz processor bus to give peak bandwidth of 5.3 Gbytes/s
• Internal primary (L1) on-die cache
• 2 Mbytes secondary (L2) shared on-die cache
• Intel® CoreT Microarchitecture
• Supports up to 8 Gbytes DDR2-400 ECC SDRAM
• 1 Mbyte of BIOS Flash EPROM
• High resolution graphics interface
• 1 x PMC site
• 4 Gigabit Ethernet ports
• 1 EIDE, 2 SATA Interfaces
• 2 x asynchronous RS232 serial channels
• 3 x USB 2.0 interfaces accessed via J5 to the  Transition Module
• 1 x USB 2.0 interface via front panel
• 0°C to +55°C (operating)

Download Datasheet

2.16 MHz Intel Core 2 Duo® 6U cPCI Single Board Computer from Emerson Network Power
Model CPCI7200

• 1.06 or 1.5 GHz Intel Core2 Duo processor
• 533 or 667 MHz front side bus
• Intel® E7520 + 6300ESB dual channel 3.2GB/s memory controller
• 2GB ECC-protected DDR2-400
• Dual on-board Gigabit Ethernet interfaces
• Support for PICMG 2.16 CompactPCI Packet Switching Backplane specification
• Full PICMG 2.1, R2.0 Hot Swap specification compliance
• PICMG 2.9 System Management
• specification support
• One or two PCI mezzanine card (PMC) site
• Hard disk drive accessory kits optional
• Optional rear transition module in PICMG 2.16 and rear I/O variants
• PLX6466 PCI-to-PCI bridge technology

Download Datasheet

• 2.16 GHz Intel Core 2 Duo Processor T7400
• 667 MHz Front Side Bus
• 64 Kbytes of primary (L1) on-die cache
• 4 Mbytes of shared secondary (L2) on-die cache
• Intel® 64 (or Intel® EM64T) 64-bit computing support
• 2.0 GHz and 1.66 GHz Core Duo processor versions available;
         see PP410 datasheet
• Utilizes Intel® E7520 server class chipset:
• Uses Intel® 6300ESB I/O Controller Hub
• 2.0 and 1.66 MHz versions available
• Dual PMC sites
• Up to 4 gbytes of dual channel DDR2-0400 ECC SDRAM
• 3 Gigabit Ethernet ports
• 4 x USB 2.0 interfaces
• 2 x SATA-150 interfaces via J5
• Operating temperature:
• 0°C to +55°C (N-Series)
• For extended temperature operation see PP410 datasheet

Download Datasheet

• 2.0 GHz Intel® CoreT Duo processor T2500
• 1.66 GHz Intel® CoreT Duo processor L2400
• Common processor features are:
• Dual-core CPU
• 667 MHz Front Side Bus
• 64 Kbytes of primary (L1) on-die cache
• 2 Mbytes of secondary (L2) on-die cache

Download Datasheet

• Two processor versions available:
• 1.8 GHz Intel^® Pentium^® M processor 745
• 1.4 GHz Intel^® Pentium^® M processor Low Voltage 738:
• Common processor features are:
• 64 Kbytes of primary (L1) on-die cache
• 2 Mbytes of secondary (L2) on-die cache
• 400 MHz Front Side Bus (FSB)

Download Datasheet

• 1.8 GHz Intel Pentium M Processor 745
• 64 Kbytes L1 cache
• 2 Mbytes L2 cache
• No CPU fan needed; low power processor
• Single slot (for all option combinations)
• Up to 2 Gbytes of DDR DRAM (with ECC)
• 2 x PMC module interfaces (32/64-bit and 33/66 MHz)
• High performance EIDE interfaces with optional on-board disk drive or optional Compact Flash / Microdrive interface
• 2 x 10/100/1000Mbps Ethernet interfaces
• Dual Gigabit Packet Switching Backplane (PICMG 2.16)
• Graphics interface
• 32 Mbytes of Application Flash EPROM
• Keyboard and Mouse interfaces
• 512 Kbytes of BIOS Flash EPROM
• 512 Kbytes of battery backed RAM
• CompactPCI controller:
• operates in system slot or peripheral slot
• 32/64-bit at 33/66 Compact PCI interface
• Option to bypass CompactPCI bus (Satellite Mode)
• IPMI (Intelligent Platform Management Interface):
• PICMG 2.9 (System Management Specification)
• Up to 3 x RS232 serial channel interfaces:
• 1 or 2 on-board
• 2 on optional Transition Module
• Watchdog timer and Long duration timer
• Commercial temperature version available see PP 310/01x datasheet
• Support for VxWorks®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, QNX® and Linux®
• Optional Transition Module for rear panel I/O:
• 2 x RS232 channels, Parallel Printer Port, and Floppy Disk interfaces included

Download Datasheet

• 1.6 GHz or 1.1 GHz Intel Pentium M Processor:
• 64 Kbytes L1 cache
• 1 Mbyte L2 cache
• No CPU fan needed; low power processor
• Single slot (for all option combinations)
• Up to 2 Gbytes of DDR DRAM (with ECC)
• 2 x PMC module interfaces (32/64-bit and 33/66 MHz)
• High performance EIDE interfaces with optional on-board disk drive or CompactFlashT / Microdrive interface
• 2 x 10/100/1000Mbps Ethernet interfaces
• Dual 1 Gbps Packet Switching Backplane (PICMG 2.16)
• Graphics interface
• 32 Mbytes of Application Flash EPROM
• Keyboard and Mouse interfaces
• 512 Kbytes of BIOS Flash EPROM
• 512 Kbytes of battery backed SRAM
• CompactPCI controller:
• operates in system slot or peripheral slot
• 32/64-bit at 33/66 MHz CompactPCI interface
• Option to bypass CompactPCI bus (Satellite Mode)
• IPMI (Intelligent Platform Management Interface):
• PICMG 2.9 (System Management Specification)
• Up to 3 x RS232 serial channel interfaces:
• 1 or 2 on-board
• 2 on optional Transition Module
• Watchdog timer and long duration timer
• Extended temperature version available see PP 310 / 011 - E datasheet
• Support for VxWorks®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, QNX® and Linux®
• Optional Transition Module for rear panel I/O:
• 2 x RS232 channels, Parallel Printer Port and floppy disk interfaces included

Download Datasheet

• Operation over ambient temperature range -25°C to +70°C
• 1.1 GHz Intel Pentium M Processor:
• 64 Kbytes L1 cache
• 1 Mbyte L2 cache
• No CPU fan needed; low power processor
• Single slot (for all option combinations)
• Up to 2 Gbytes of DDR DRAM (with ECC)
• 2 x PMC module interfaces (32/64-bit and 33/66 MHz)
• High performance EIDE interfaces with optional on-board CompactFlashT interface
• 2 x 10/100/1000Mbps Ethernet interfaces
• Dual 1 Gbps Packet Switching Backplane (PICMG 2.16)
• Graphics interface
• 32 Mbytes of Application Flash EPROM
• Keyboard and Mouse interfaces
• 512 Kbytes of BIOS Flash EPROM
• CompactPCI controller:
• operates in system slot or peripheral slot
• 32/64-bit CompactPCI interface
• 33/66 MHz operation
• Option to bypass CompactPCI bus (Satellite Mode)
• IPMI (Intelligent Platform Management Interface):
• PICMG 2.9 (System Management Specification)
• Up to 3 x RS232 serial channel interfaces:
• 1 or 2 on-board
• 2 on optional Transition Module
• Watchdog timer
• Commercial temperature version available see PP 310/01x datasheet
• Support for VxWorks®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, QNX® and Linux®
• Optional Transition Module for rear panel I/O:
• 2 x RS232 channels, Parallel Printer Port, 2 x
• Ethernet, EIDE and Floppy Disk interfaces included

Download Datasheet

• ULV Celeron® M 373, 1GHz
• Up to Pentium® M 760, 2GHz
• PCI Express® 4 lanes x1
• 4HP system master or busless
• 32-bit CompactPCI® or cPCI Express®
• Up to 1 GB DDR2 DRAM soldered
• CompactFlash® or 1.8" hard disk slot
• 2 SATA interfaces
• Video via VGA and 2 DVI
• 2 Gigabit Ethernet (PCIe)
• Up to 8 USB 2.0
• High Definition audio
• Power consumption 11..35W
• Prepared for rugged environments

Download Datasheet

• 2.2 GHz or 1.7 GHz Intel Pentium 4 Processor-M:
• 400 MHz Front Side Bus
• 512 Kbytes L2 cache
• no CPU fan needed
• single slot
• Up to 2 Gbytes DDR SDRAM (with ECC)
• Ultra 160 SCSI interface
• High performance EIDE interfaces with on-board
• CompactFlash site
• Optional on-board 2.5 inch disk drive or
• CompactFlash/MicrodriveT carrier (within a single slot)
• 3 x 10/100/1000Mbps Ethernet interfaces
• Dual Gigabit Packet Switching Backplane (PICMG 2.16)
• 1 x PMC module interface (32/64-bit and 33/66 MHz)
• High resolution graphics interface
• PS/2 Keyboard and Mouse port
• 512 Kbytes of BIOS Flash EPROM
• 8 Mbytes of Application Flash
• CompactPCI controller:
• Operates in system slot or peripheral slot
• 32/64-bit at 33/66 MHz CompactPCI interface
• Option to bypass CompactPCI bus (Satellite Mode)
• IPMI (Intelligent Platform Management Interface):
• PICMG 2.9 (System Management Specification) with BMC (Baseboard Management Controller)
• 2 x USB ports
• 2 x asynchronous RS232 serial channels
• Floppy disk interface
• Watchdog timer; Long Duration Timer
• Parallel Printer Port (ECP, EPP and IEEE1284)
• Optional blank front panel (see PP 200/11x datasheet)
• Optional Transition Module for rear panel I/O
• Support for Linux®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded,  VxWorks® and QNX®

Download Datasheet

• 3U CompactPCI based form factor, in one or two slot widths
• 1.6 GHz Intel® Atom™ processor Z530:
• 512 Kbytes L2 cache
• 533 MHz Front Side Bus
• Intel Hyper-Threading Technology supporting 2 execution threads
• Intel® Virtualization Technology
• Combined thermal design power of processor and chipset is less than 5 Watts
• 1 Gbyte soldered DDR2-533 SDRAM
• Single PMC/XMC site available on an optional second slot board:
• 32-bit, 33/66 MHz PCI operation
• 3.3V and 5V PCI signaling levels
• XMC supported via x1 PCI Express® port
• 4 x Serial ATA300 interfaces:
• 2 x channels accessible via J2
• 1 x channel routed to 2.5" SATA300 disk drive on optional second slot board
• 1 x channel routed to a CompactFlash® site on both second slot board options
• CompactFlash site on the single slot base board
• 2 Gigabit Ethernet ports
• High Definition stereo audio
• Analog graphics interface, front or rear
• One or two RS232 serial channels 
• legacy speaker interface
• 5 x USB 2.0 interfaces
• High Speed CANbus controller
• Operates as a System Slot controller (supports up to 7 peripheral slots) or in a Peripheral Slot
• PICMG 2.1 R2.0 Hot Swap Compliant  
• IPMI (Intelligent System Management Platform) per PICMG 2.9 R1.0
• Support for Linux®, Windows®, QNX®, and VxWorks®
• Operating temperature ranges:
• 0°C to +55°C (Standard)
• -25°C to +70°C  (Extended Temp)
• -40°C to +85°C  (Rugged)

Download Datasheet

• 3U CompactPCI based form factor, in one or two slot widths
• 1.6 GHz Intel® Atom™ processor Z530:
• 512 Kbytes L2 cache
• 533 MHz Front Side Bus
• Intel Hyper-Threading Technology supporting 2 execution threads
• Intel® Virtualization Technology
• Combined thermal design power of processor and chipset is less than 5 Watts
• 1 Gbyte soldered DDR2-533 SDRAM
• Single PMC/XMC site available on an optional second slot board:
• 32-bit, 33/66 MHz PCI operation
• 3.3V and 5V PCI signaling levels
• XMC supported via x1 PCI Express® port
• 4 x Serial ATA300 interfaces:
• 2 x channels accessible via J2
• 1 x channel routed to 2.5" SATA300 disk drive on optional second slot board
• 1 x channel routed to a CompactFlash® site on both second slot board options
• CompactFlash site on the single slot base board
• 2 Gigabit Ethernet ports
• High Definition stereo audio
• Analog graphics interface, front or rear
• One or two RS232 serial channels 
• legacy speaker interface
• 5 x USB 2.0 interfaces
• High Speed CANbus controller
• Operates as a System Slot controller (supports up to 7 peripheral slots) or in a Peripheral Slot
• PICMG 2.1 R2.0 Hot Swap Compliant  
• IPMI (Intelligent System Management Platform) per PICMG 2.9 R1.0
• Support for Linux®, Windows®, QNX®, and VxWorks®
• Operating temperature ranges:
• 0°C to +55°C (Standard)
• -25°C to +70°C  (Extended Temp)
• -40°C to +85°C  (Rugged)

Download Datasheet