VMEBus - Intel Architecture
    Processor                                      SBC Model
Dual-Core Intel® Xeon® Dual                   VP426
Intel® Core™ Duo                                       VP405
Dual Core Intel Xeon™ Dual processors   
VP426 Dual Core Xeon Intel processor board VME and VXS

6U VME or VXS Dual-Core Intel Xeon Dual Single Board Computer
Model VP426
  • Dual 1.66 GHz Dual-Core Intel® Xeon® processors ULV
    • internal primary (L1) on-die cache
    • 2 Mbytes secondary (L2) shared on-die cache
  • Tundra® Tsi148 PCI-X VME bridge
  • no CPU fan required
  • 64-bit Intel® E7520 chipset
  • Supports up to 8 Gbytes DDR2-400 ECC SDRAM
  • EIDE interface:
    • can be used for an ATA-100 EIDE disk drive or up to 2 CompactFlash™ Type II drives in a single slot
  • 2 x Serial ATA150 interfaces:-
    • both channels accessible via P2 to a Rear Transition Module (RTM)
    • one channel switchable to on-board SATA disk drive
    • transfer rate up to 150 Mbytes/s
  • 4 x channels supporting 10Base-T, 100Base-TX, 1000Base-T  
  • Support for VITA 31.1 - Gigabit Ethernet for VME64x backplane or support for rear panel RJ45’s to a Rear Transition Module (RTM)
  • Graphics interface  - analog & digital
  • PMC/XMC shared site
  • 4 x RS232/RS422 asynchronous serial channels
  • 16550 compatible UART
  • Keyboard and mouse interfaces
  • PC-compatible Real Time Clock (Year-2000 compliant)
  • 4 x USB 2.0 interfaces
  • Two CPU temperature monitors; voltages monitor; board temperature monitor
  • Legacy speaker interface  
  • Operating temperatures:-
    • 0°C to +55°C (N-Series)
    • -25°C to +70°C (E-Series)  
  • Support for Linux®, Windows® Server 2003, Windows® XP, Windows® 2000, QNX®, Solaris™ and LynxOS®

    • Download Datasheet

VP417 Intel Core 2 Duo Processor card VME or VXS

6U VME Intel Core 2 Duo Single Board Computer
Model VP417

  • 2.16 GHz Intel® Core™ 2 Duo processor T7400 or 1.5 GHz Intel® Core™ 2 Duo processor L7400 Dual-core CPU

    • 667 MHz Front Side Bus
    • 64 Kbytes of primary (L1) on-die cache
    • 4 Mbytes of shared secondary (L2) on-die cache
    • Intel® 64 (or Intel® EM64T) 64-bit computing support
    • No CPU fan required
  • Supports up to 4 Gbytes DDR2-400 ECC SDRAM
  • 2 Gigabit Ethernet ports
  • 2 x EIDE interfaces
  • 2 x SATA interfaces
  • USB and Flash interfaces
  • Up to 3 x RS232 serial channels
  • Operating temperatures:
    • 0°C to +55°C (N-Series: up to 2.16 GHz)

    • -25°C to +70°C (E-Series: 1.5 GHz)

    • -40°C to +85°C (K-Series: 1.5 GHz)

  • Available in extended temperature and conduction cooled versions

    • Download Datasheet

VP407 Intel Cor 2 Duo Processor Card in VME or VXS

6U VME and VXS Intel Core 2 Duo Single Board Computer
Models VP407 and VX407
  • up to 2.16 GHz Intel® CoreT 2 Duo processor T7400:
    • Dual-core CPU
    • 667 MHz Front Side Bus
    • 64 Kbytes of primary (L1) on-die cache
    • 4 Mbytes of shared secondary (L2) on-die cache
    • Intel® 64 (or Intel® EM64T) 64-bit computing support 
  • Supports up to 4Gbytes DDR2-400 ECC SDRAM
  • 2 rear Gigabit Ethernet ports
  • 1 front panel Gigabit Ethernet port
  • 2 x EIDE interfaces
  • 5 x USB 2.0 (Universal Serial Bus) interfaces
  • Up to 3 x RS232 serial channels:
  • 1 x Tx/Rx channel accessed via a 26-way high-density connector on front panel
  • 1 or 2 Tx/Rx channels via Transition Module
  • Operating temperature:
    • 0°C to +55°C (N-Series)

    • -25°C to +70°C (E-Series: 1.5 GHz)

    • -40°C to +85°C (K-Series: 1.5 GHz)

  • Available in extended temperature and conduction cooled versions

    • Download Datasheet

VP405 Intel Core Duo Single Board Computer

6U VME Intel Core Duo Single Board Computer
Model VP405
  • 1.66 or 2.0 GHz Intel® CoreT Duo processor (originally called Yonah)
  • Low power processor; no CPU fan
  • Dual channel architecture, up to 4 Gbytes of 667MHz DDR2 SDRAM
  • Compatible with VME64x and VXS (VITA 41.3)
  • 1 x PMC/XMC slot
  • 2 x EIDE interfaces, up to Ultra-DMA 100 support
  • 2 x rear I/O interfaces:
  • 2 x 10/100/1000Mbps Ethernet channels when P0 not fitted, accessed via P2 for either VME64x or VXS backplanes; or 2 x 1000Mbps IEEE 802.3 backplane ports, accessed via VXS P0 connector for VITA 41.3 on a VXS backplane
  • 1 x Ethernet channel accessed via front panel RJ45 connector:-
  • Analog VGA and flat panel supported via P2 connector
  • P0 supports High Definition Audio (HDA) Codec on breakout
  • 2 x asynchronous serial channels user configurable for RS232, RS422 or RS485
  • Keyboard and mouse interfaces
  • 5 x USB 2.0 (Universal Serial Bus) interfaces:-
  • Support for Linux®, Windows®, VxWorks® and QNX®
  • Operating temperatures:
    • 0°C to +55°C (N-Series: up to 2.0 GHz)
    • -25°C to +70°C (E-Series: 1.66 GHz)
    • -40°C to +55°C (J-Series: 1.66 GHz)

      • Download Datasheet

Intel Pentium M
VP347 Intel Pentium M VMEbus SBC
6U VME Intel Pentium M Single Board Computer
Model VP347
  • 1.4 or 1.8 GHz Intel® Pentium® M processor 745
  • No CPU fan
  • Up to 2 Gbytes 333 MHz DDR ECC SDRAM
  • Ultra-SCSI 8-bit and Ultra Wide SCSI 16-bit via P2 connector
  • EIDE interface via P2 connector supports up to Ultra-DMA 100
  • 2 x 10/100/1000 Base-T Ethernet connectors
  • Analog and flat panel graphics support via front panel
  • 2 x RS232 serial interfaces
  • One PMC slot with I/O via front panel and optionally via P0
  • 4 x USB 2.0 (Universal Serial Bus) interfaces:-
  • Keyboard and mouse interfaces via front panel
  • Floppy disk and parallel printer port interfaces via P2 connector
  • Support for VxWorks®, Windows®, RTX®, Linux®, Solaris®, LynxOS®, QNX® and MS-DOS®
  • Operating temperatures:
    • 0°C to +55°C (N-Series: 1.8 GHz, 1.4 GHz)
    • -25°C to +70°C (E-Series: 1.4 GHz)
    • -40°C to +85°C (K-Series: 1.4 GHz)

      • Download Datasheet

1.6 GHz or 1.1 GHz Intel Pentium M VME SBC
Concurrent Technologies 1.6 GHz or 1.1 GHz Intel® Pentium® M Processor based Dual PMC Embedded Controller VITA 31.1 Compliant
Model VP315
  • Intel® Pentium® M Processor operating at 1.6 GHz or 1.1 GHz:-
    • 1.6 GHz uses mFC-PGA 478 (micro Flip-Chip Pin Grid Array) package
    • 1.1 GHz uses mFC-BGA 479 (micro Flip-Chip Ball Grid Array) package
    • 64 Kbytes of primary (Level 1) on-die cache
    • 1 Mbyte of secondary (Level 2) on-die cache
    • 400 MHz Front Side Bus (FSB)
    • 0.13 micron low power processor
  • 64 Mbytes Application Flash EPROM
  • 512 Kbytes of BIOS Flash EPROM
  • No CPU fan
  • Utilizes 64-bit Intel® 855GME chipset:-
    • supports 400 MHz bus frequency
  • Utilizes Intel® 6300ESB I/O Controller Hub
  • Intel Pentium M (ITP) debug port
  • Support for VxWorks®, Linux®, Windows® NT, Windows® 2000, Windows® XP, Windows® XP  Embedded, RTX®, QNX®, Solaris®, LynxOS® and MS-DOS®
  • PC-compatible Real Time Clock (Year 2000 compliant)
  • 2 x USB 2.0 interfaces, one via P2 connector and one via optional P0
  • Keyboard and mouse interfaces accessed via a 26-way high-density connector on front panel and optionally via P0 connector
  • Watchdog timer
  • 1 x 32-bit Long Duration Timer with processor interrupt capability

    • Download Datasheet


Concurrent Technologies 1.8 GHz Intel Pentium M 745 based Single-Slot VME board VITA 31.1 Compliant
Model VP307
  • 1.8 GHz Intel® Pentium® M processor 745:-
    • Uses µFC-PGA 478 (micro Flip-Chip Pin Grid Array) package
    • 400 MHz Front Side Bus
    • 64 Kbytes of primary (L1) on-die cache
    • 2 Mbytes of secondary (L2) on-die cache
    • no CPU fan; low power processor
  • Utilizes 64-bit ServerWorks' GC-LE chipset
  • Supporting up to 1.5 Gbytes of DDR ECC SDRAM:-
    • 512 Mbytes soldered on-board DRAM
    • up to 1 Gbyte provided via a SODIMM socket
    • error correction up to 4-bits
  • Accessible from Intel Pentium M processor 745 or VME bus
  • ITP debug port
  • Keyboard and mouse interfaces via a single PS/2T type connector on front panel and via P2 connector (see Note)
  • Floppy disk interface via P2 connector
  • 2 x USB (Universal Serial Bus) interfaces:-
    • 1 x USB interface accessed via a USB connector on front panel
    • 1 x USB interface via P2 connector (see Note)
  • 3 x General Purpose I/O bits via P2 connector (see Note)
  • Speaker interface via P2 connector
  • PC-compatible Real Time Clock (Year 2000 compliant)
  • WWatchdog timer
  • 1 x 32-bit Long Duration Timer with processor interrupt capability
  • Support for Linux®, Windows® NT, Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, VxWorks®, QNX®, Solaris® and MS-DOS®

    • Download Datasheet

Concurrent Technologies 6U VME Pentium M Single Board Computer - VITA 31.1 Compliant
Model VP305
  • 1.6 GHz or 1.1 GHz Intel Pentium M processor:
    • 64 Kbytes L1 cache
    • 1 Mbyte L2 cache
    • improved P4 architecture
    • No CPU fan needed; low power processor
  • Up to 1.5 Gbytes of DDR DRAM (with ECC)
  • High performance EIDE interfaces with optional
  • on-board disk drive (in a single slot)
  • Supports optional CompactFlash or MicroDrive
  • 1 x 10/100Mbps Ethernet interface (front panel)
  • 2 x 10/100/1000Mbps Ethernet interfaces:
    • P2 I/O or Ethernet on VME64x backplanes (VITA 31.1)
  • 32 Mbytes Application flash EPROM
  • 512 Kbytes of BIOS Flash EPROM
  • Floppy disk interface
  • Front panel and P2 I/O combinations available:
    • Analog and digital graphics interfaces
    • Keyboard and mouse interfaces
    • 2 x asynchronous RS232/RS422/RS485 serial channels
    • 2 x Universal Serial Bus (USB) ports
  • 64-bit PMC module interface, operating up to 66 MHz
  • Expansion connector for dual site PMC carrier board
  • Watchdog timer and Long Duration Timer
  • VME64 Interface supporting
  • A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with support for fast hardware byte-swapping
  • Single slot
  • Extended temperature version available, see VP 305/01x-E/K datasheet
  • Support for Windows NT®, Windows® 2000, Windows®, XP, VxWorks® , Linux® and QNX®
  • Extended temperature range version available in 1.1 GHz version only

    • Download Datasheet